Troubleshooting
RESETTING THE ACTIVE TOUCH DISPLAY HEIGHT
• Press 1, 2, 1, 2. The text will begin blinking “SELECT”, “HEIGHT”.
• Lift up or press down on the controller to scroll through the starting height options.
• Once the correct height has been chosen, pause for 2 seconds.
• The light guide will fill. When all three bars are full, the starting height is saved.
ERROR CODES
• In the event of a fault, the display may show an error code number and
brief description. Refer to Steelcase Flex Collection Height-Adjustable Desk
troubleshooting guide for further instruction.
To Next Page
Loading...