Need help?Do you have a question about the STEELE PRODUCTS SP-GG900E and is the answer not in the manual?
Discusses CO hazards and proper generator placement to avoid poisoning.
Covers fuel/oil requirements, handling, and storage safety precautions.
Explains grounding, plugs, and safe electrical connections for user protection.
Advises staying alert, using common sense, and avoiding distractions during operation.
Covers safe operation practices, adjustments, and general maintenance.
Includes warnings for pacemakers and general safety during generator setup.
Precautions for handling chemicals and protection from prolonged noise exposure.
Step-by-step guide to installing the required 12V battery for electric start.
Steps for unpacking the generator and verifying all parts are present.
Instructions for attaching the generator's handle.
Steps to assemble and attach the wheel kit for mobility.
Details on selecting and filling the correct engine oil for performance and life.
Procedures for starting the generator using electric or recoil start methods.
Safe procedures for shutting down the engine and fuel valve.
Connecting AC and DC loads to the generator safely and correctly.
Covers pre-use checks, cleaning, lubrication, oil changes, and storage.
Guidance on outdoor placement, ventilation, and drainage.
Instructions for securing the generator on a stable surface.
Importance and procedure for grounding the generator for safety.
Lists parts for the cylinder head assembly.
Lists parts for the crankshaft assembly.
Lists parts for the recoil starter assembly.
Lists parts for the carburetor assembly.
Lists parts for the control box assembly.
Lists major generator components.
Lists parts for the wheel and handle assembly.
Discusses CO hazards and proper generator placement to avoid poisoning.
Covers fuel/oil requirements, handling, and storage safety precautions.
Explains grounding, plugs, and safe electrical connections for user protection.
Advises staying alert, using common sense, and avoiding distractions during operation.
Covers safe operation practices, adjustments, and general maintenance.
Includes warnings for pacemakers and general safety during generator setup.
Precautions for handling chemicals and protection from prolonged noise exposure.
Step-by-step guide to installing the required 12V battery for electric start.
Steps for unpacking the generator and verifying all parts are present.
Instructions for attaching the generator's handle.
Steps to assemble and attach the wheel kit for mobility.
Details on selecting and filling the correct engine oil for performance and life.
Procedures for starting the generator using electric or recoil start methods.
Safe procedures for shutting down the engine and fuel valve.
Connecting AC and DC loads to the generator safely and correctly.
Covers pre-use checks, cleaning, lubrication, oil changes, and storage.
Guidance on outdoor placement, ventilation, and drainage.
Instructions for securing the generator on a stable surface.
Importance and procedure for grounding the generator for safety.
Lists parts for the cylinder head assembly.
Lists parts for the crankshaft assembly.
Lists parts for the recoil starter assembly.
Lists parts for the carburetor assembly.
Lists parts for the control box assembly.
Lists major generator components.
Lists parts for the wheel and handle assembly.
General| Fuel Type | Gasoline |
|---|---|
| Starting System | Recoil |
| Voltage | 120V |
| Frequency | 60 Hz |
| AC Output | 120V |
| DC Output | 12V |
| Engine Type | 4-stroke OHV |
| Outlets | 2x 120V 20A (5-20R) |
To Next Page
