SteelSeries ARCTIS 7P WIRELESS - MICROPHONE; SIDETONE DIAL; POSITIONING

6s
2.4
GHz
Windows
10
PAIRING
Note: The headset is already paired with the
Dongle out of the box. To re-pair the Dongle:
1 Connect the USB-C Wireless Dongle
11
to a
Windows PC with SteelSeries Engine installed.
2 Initiate wireless dongle pairing from Engine.
3 With the headset o, press and hold the Power
Button
10
for 6 seconds.
4 You will hear a tone when the pairing is
completed.