98
POWER
POWER ON/OFF
Press and hold the Power Button (7) for 1
second to power the Headset On/O.
When the Headset is powered on and connected, the
Dongle’s Status LED (17) increases brightness.
CHARGING
To charge the headset, connect the Charging Cable (19) from the
Headset’s USB-C Charging Jack (13) to any USB power source.
The color of the Power Indicator LED (8) indicates the battery level.
Green 100–50 %
Yellow 49–15 %
Red 14–5 %
Red (fast blink) 4–1 %
PAIRING
Note: The headset and dongle come paired.
If you need to re-pair:
1 Connect the Wireless Dongle (14) to your gaming device.
2 Press and hold the Dongle’s Pairing Button (16) for 4
seconds until the Power Indicator LED (8) blinks rapidly.
3 With the headset o, press and hold the Power Button (7) for
4 seconds until the Power Indicator LED (8) blinks rapidly.
4 When pairing is successful you will hear a tone, and
the Dongle’s Status LED (17) will turn solid.
To Next Page
Loading...
