6
The Siberia Elite comes with multiple
connections allowing the headset to be
compatible with PC, Mac ®, and mobile devices.
When connecting to a PC or Mac ® use the
USB sound card and main male connector
plug for headset and microphone mute on/
off illumination. Additional sound card audio
features and illumination settings can be
customized through SteelSeries Engine 3 at
Steelseries.com/engine.
The Siberia Elite Headset can also be connected
to a PC without the sound card. For this setup
rst plug the PC connector directly into the main
Siberia Elite male connector plug. Next connect
the two audio 3.5mm connectors to the audio
ports on your computer. Make sure to plug the
red tipped connector into the microphone input
and the green tipped connector into the speaker
output from the computer. This connection does
not support illumination or any additional sound
card features.
The Mobile connector is designed to be used
with your mobile phone, tablet, or Mac®
computer that supports a single 4-pole 3.5mm
jack for both audio output and microphone
input. For this setup first plug the mobile
connector directly into the main Siberia Elite
male connector plug. Next connect the single
3.5mm connector into your mobile device or
computer.
Using the PC and Mobile/Mac® connectors
directly with the headset will not support
illumination or any additional sound card
features.
To properly connect all male and female
connectors line up the arrow markings.
CONNECTIONS
To Next Page
Loading...
Need help?
General
