Steenbeck ST1401 User Manual

V01-2013
Copyright
©
1978 – 2013.
Steenbeck is a trademark.
No part of this manual may be reproduced without the prior written permission of Steenbeck.
Specifications, colours etc. are subject to change without notice. Images are an example.
STEENBECK USER MANUAL 35mm 01-SERIES
Compact sized flatbed editors:
ST3511 2 plate, COMOPT sound.
for 600 meters / 2000 feet of film.
ST1401 4 plate, COMOPT and 1 track SEPMAG sound.
for 600 meter / 2000 feet of film and perforated tape.
ST401 4 plate, COMOPT and 1 track SEPMAG sound.
for 600 meter / 2000 feet of film and perforated tape.
picture-sound shift system for 1 track.
Larger sized flatbed editors:
ST701 6 plate, COMOPT and 2 tracks SEPMAG sound.
for 600 meter / 2000 feet of film and perforated tape.
picture-sound shift system for 2 tracks.
ST721 6 or 8, plate version with 2 picture system.
standard with one COMOPT and 2 tracks SEPMAG sound.
depending on version from 350 meter / 1200 feet up to
600 meter / 2000 feet of film and perforated tape.
picture-sound shift system for 2 tracks.
8 plate version can have 4 plates of 600 meter/2000 feet.

Steenbeck ST1401 Specifications

General

Brand	Steenbeck
Model	ST1401
Category	Laboratory Equipment
Language	English

Summary

Introduction and General Data

1.0 Introduction

Overview of the 35mm 01-Series film editing, viewing and controlling tables.

2.0 General Data

Provides general specifications and features of the 35mm 01-Series film tables.

Technical Specifications

3.1 Drive System

Details the drive technology, film plates, shrunken material handling, and frictions.

3.2 Picture System

Describes the rear screen projection method, image quality, and lamp features.

3.3 Sound System

Explains the sound reproduction capabilities, pre-amplifiers, and speaker options.

3.4 General Data

Covers power requirements, consumption, fuse details, and physical dimensions.

Safety and Warranty Information

4.1 Safety Precautions

Essential safety guidelines for installation, maintenance, and operation of the Steenbeck machine.

4.2 Warranty Information

Details the warranty period, terms, conditions, and exclusions for Steenbeck film machines.

Operating the 35mm 01-Series

5.1 General Overview

Provides a general overview of the Steenbeck 35mm 01-Series editor's main components.

5.2 Switch Board and Pressure Switches

Explains the function of switches on the board and pressure switches for operation.

5.3 Sound Preamplifier Section

Details the sound preamplifier section, including volume controls and headphone output.

5.4 Drive Deck Overview

Illustrates and describes the components of the drive deck, including sprockets and rollers.

5.5 Fuse Panel

Locates and identifies the fuses on the machine and explains their function.

5.6 Connecting to Mains Power

Instructions for safely connecting the Steenbeck machine to the power network.

5.7 Threading Film

Step-by-step guide for threading 35mm film, with and without sound.

5.8 Rewind Operation

Advises on the correct procedure for rewinding film to prevent damage.

5.9 Sound Operation

Guidance on operating the sound system, including optical and magnetic sound.

Universal Counter and Synchronization

6.0 Universal Counter Functions

Details the functions and operation of the universal counter for film length and time.

Picture-Sound Shift System

Explains the picture-sound synchronizer for adjusting sound tape against the picture tape.

External Connections and Lamps

7.0 Connecting Loudspeakers and Working Lamp

Instructions for connecting external loudspeakers and an optional working lamp.

Maintenance and Adjustments

8.1 Maintenance Introduction

Overview of maintenance requirements and general cleaning advice for the Steenbeck 01-Series.

8.2 Picture Lamp Replacement

Step-by-step guide for replacing the picture lamp and its associated components.

8.3 Exciter/Optical Sound Lamp Replacement

Procedure for replacing the exciter lamp or optical sound lamp.

8.4 Pressure Arm Adjustment

Instructions for adjusting the pressure arms for optimal film handling.

8.5 Optical Part Cleaning

Guidance on cleaning mirrors, polygon, lenses, and the illumination system.

8.6 Friction Adjustment

Detailed instructions for adjusting the friction units for proper film tension.

8.7 General Maintenance Schedule

Recommended maintenance intervals and tasks for daily, 100-hour, and 500-hour checks.

8.8 Guide Ring Adjustment

Procedure for adjusting the guide ring for 35mm film width and gate alignment.

Spare Parts List

9.0 List of Slow / Fast Moving Parts

Catalog of fast and slow-moving spare parts for the 35mm 01-Series.

Operation Field Table Top Controls

10.1 Speed Switch ST3511

Details the speed selector and control lever functions for the ST3511 model.

10.2 Speed Switch ST(1)401

Explains the speed selector, control lever, and clutch/brake switches for ST(1)401.

10.3 Speed Switch ST701

Describes the speed controls and clutch/brake switches for the ST701 model.

10.4 Speed Switch ST721

Details the speed and clutch/brake switches for the ST721 model, including framing.

Picture Lamp Adjustment

11.0 Adjustment Picture Lamp 35mm

Instructions for adjusting the picture lamp for uniform illumination and minimal flickering.