Steg QMos 45.6mx User Manual

MANUALE DI ISTRUZIONI
USER'S MANUAL
MANUEL D’INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
SIX CHANNELS
AMPLIFIERSAMPLIFIERS
75.6mx
45.6mx
DEFINITIONDEFINITION
MOSFETMOSFET
POWERPOWER
AMPLIFIERAMPLIFIER
HIGHHIGH
EFFICIENCYEFFICIENCY
SUPPLYSUPPLY
HIGHHIGH
SUPPRESSORSUPPRESSOR
NOISENOISE
CROSS-OVERCROSS-OVER
MULTIFUNCTIONMULTIFUNCTION
BUILT-INBUILT-IN

Steg QMos 45.6mx Specifications

General

Channels	4
Output Power @ 4 Ohms	45W x 4
Signal to Noise Ratio	90 dB
Input Sensitivity	0.2V - 5V
High Pass Crossover	50Hz - 250Hz
Low Pass Crossover	50Hz - 250Hz

Summary

Technical Specifications and Diagrams

Amplifier Model Specifications

Detailed technical data for the 45.6mx and 75.6mx amplifier models.

Power Supply and System Protection

Connecting Amplifier Power

Proper connection of the positive and negative battery terminals for the amplifier.

Fuse Installation and Safety

Guidelines for correctly installing and selecting fuses to protect the power supply line.

Speaker Output Configurations

Stereo Speaker Wiring

Connecting speakers in stereo mode for 2 or 4 Ohm loads.

Mono Speaker Wiring

Connecting speakers in mono mode for 4 Ohm loads or higher.

Combined Mono/Stereo Setup

Utilizing both stereo and mono outputs for multi-speaker system configurations.

Electronic Crossover and Module Setup

Electronic Crossover Operation

AQXM2 Crossover Module

Advanced Crossover Filtering

Filter Bypass Configuration

Configuring Active Filters

Mixed Filter Mode Examples