Steinbach Classic 310 - Declaration of Conformity

1
040840 - valve head
2
040842 - bleeder screw (incl. seal)
3
040843 - valve head seal
4
040844 - vessel seal
5
040860 - sight glass for valve head
6
040845 - locking ring (incl. screw ng)
7
040847 - riser pipe including screen
8
040849 - centering device
9
040850 - screen
10
040851 - lter arm
11
040852 - drainage screws set
12
040854 - lter vessel Ø 370 mm
13
040856 - base plate
14
040862 - pressure hose L = 38 cm, Ø 38 mm
15
040946 - hose clamp (2x)
16
040952 - manometer
17
040920 - pump SPS 75-1
18
040841 - hose adapter
19
040978 - screw set for fastening pump (2x)
Declaration of Conformity
Steinbach Internaonal GmbH hereby declares that the lter pump meets
the following direcves:
- EMC Direcve (2014/30/EU)
- EN55014-1: 2017; EN55014-2: 2015; EN61000-3-2: 2014; EN61000-3-3: 2013
- AfPS GS 2019:01 PAK
- EN 60335-2-41: 2003 / A2:2010; EN 60335-1:2012 / A2: 2019; EN 62233:2008
- EC Direcve (2014/35/EU)
You can request the complete text of the EU Declaraon of Conformity from the address
stated at the end of this instrucon manual.
66