Why does my Steinberg Systems SBS-MD-20 Metal Detector emit false signals?
If your Steinberg Systems Metal Detector emits false signals, it might be due to several reasons. Try reducing the sensitivity to avoid environmental electromagnetic interference. Ensure you move the detector probe slower and hold it correctly. Also, if using multiple detectors, keep them at least 6 meters apart to prevent interference.
What to do if my Steinberg Systems Metal Detector does not detect anything?
If your Steinberg Systems Metal Detector isn't detecting anything, the sensitivity might be set too low; increase it. Ensure the probe is aligned parallel to the ground. If the detector has found several different metal objects, try reducing the sensitivity to eliminate detection of deeper targets.
Why does my Steinberg Systems SBS-MD-20 Metal Detector beep without detecting a target?
If your Steinberg Systems Metal Detector displays a reading or beeps without detecting a target, it may be receiving interference and false signals from the transmitting antenna and other electrical lines. Try changing the search location and wait a while before trying again. Also, high ambient humidity can cause this issue.
How to fix a Steinberg Systems SBS-MD-20 Metal Detector that does not work?
If your Steinberg Systems Metal Detector isn't working, check that the 5-pin cable is correctly connected. If the cable is correctly connected, replace the battery.
Overview of the metal detector's purpose and features.
Summary of product specifications and parameters.
Essential safety precautions for operation and handling.
Instructions for safe operation and maintenance of the unit.
General principles and guidelines for operating the detector.
Details and identification of the metal detector's parts.
Explanation of buttons, modes, and display elements on the control panel.
Description of the four available operating modes.
Step-by-step instructions for assembling and preparing the unit.
Guide on installing batteries and connecting headphones.
Instructions for testing, indoor, and outdoor operation.
Techniques for effective probe movement during detection.
Factors affecting detection and a table for target identification.
How to use features and maintain the unit.
Solutions for common problems and guidance on proper disposal.
General| Operating Frequency | 6.6 kHz |
|---|---|
| Headphone Jack | Yes |
| Weight | 1.2 kg |
| Battery Life | 20 hours |
| Battery Type | 9V battery |
| Material | Aluminium |
To Next Page
