The new glue gun generation.
Speedier hotmelt for
professionals.
New twin PTC technology offers quicker
heating, constant glueing
temperature (200° C) and
3 times the glueing capability.
Extra
long spare
nozzle for
inaccessible
places.
Flexible
drip tray.
Place gluestick in rear
heating channel.
Recharge by placing on
contact socket (e.g.: when
trigger becomes stiff or
outcoming glue is viscous).
Positioned in stand
charger.
Place the glue on one side
by squeezing the trigger.
Press the glued parts firmly
together. After approx.
2 mins. the connection is
solid.
Plug cord into glue gun or
heat up the gun in stand
charger for 3–5 mins. Con-
trol display lights up.
After 5 mins. max. remove
the gun from the charger
with a forward movement.
Do not pull upwards.
Front
support.
Moveable contact
socket integrated into
stand charger.
Power cord
Function and operation
GB
6
To Next Page
