To Next PageTo Next Page
Need help?Do you have a question about the STEINEL XLED home 2 and is the answer not in the manual?
General| Type | Outdoor spot lighting |
|---|---|
| Glass color | Opal |
| Product color | Graphite |
| Housing material | Plastic |
| Protection class | II |
| Integrated sensors | Motion sensor |
| Suitable for outdoor areas | - |
| International Protection (IP) code | IP44 |
| Bulb type | LED |
| Bulb power | 14.8 W |
| Light color | White |
| Bulb lifetime | 50000 h |
| Number of bulbs | - bulb(s) |
| Bulb(s) included | Yes |
| Fitting/cap type | Non-changeable bulb(s) |
| Color temperature | 4000 K |
| Luminous efficacy | 80 lm/W |
| Color Rendering Index (CRI) | 80 |
| Sensor type | Passive infrared (PIR) sensor |
| Detection angle | 140 ° |
| AC input voltage | 230 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Quantity per pack | 1 pc(s) |
| Operating temperature (T-T) | -20 - 40 °C |
Weight and Dimensions| Depth | 161 mm |
|---|---|
| Width | 180 mm |
| Height | 194 mm |
Crucial safety step to disconnect power before any work on the unit.
Defines the intended application and mounting of the LED floodlight.
Explains how to connect the power supply cable to the unit.
Guides on choosing the right place for mounting based on detection range.
Instructions on positioning the floodlight head for optimal coverage.
Detailed steps for detaching components and preparing for mounting.
Adjusts how long the light stays on after detecting motion.
Sets the light sensitivity threshold for motion detection.
Diagnoses issues related to the floodlight not turning on.
Addresses problems with motion detection not working correctly.
Troubleshoots issues with connecting via Bluetooth.
