STANDARD FITTINGS
4-prong-mandrel MT2 D=25 mm
4-prong mandrel MT 2 D=35 mm
Live centre MT2/with pressring D=20x26 mm
Mounted fix at spindle nose
never use the indexing pin for locking the spindle!
TECHNICAL SPECIFICATIONS
Centre height 280 mm
Distance between centres 850 mm standard
optional 1500 mm with 2
nd
short bed/3
rd
foot
optional 2300 mm with 2
nd
long bed/4 feet
Swing over bed 560 mm
Swing with outrigger 900 mm appor.
Spindle thread M 33 with centering collar, inner cone MK 2
Spindle bearing 2 angular ball bearings front , 1 ball-bearing rear
Indexing System integrated indexing system with scale
Spindle speed rpm 3steps: 40-850 80-1645 125-3025 rpm/min.
Max. permissible workpiece D 500 220 130 mm
Tailstock MK 2 quill taper, stroke 135 mm with scale
Spindle motor 400 V/3 ph/2,2 kW/50 Hz/ connected value B16A
inverter electric mains 230 V/1 ph/50 Hz
Vee-belt poly-vee-belt 10PJ 711
Electrical system with undervoltage and overload protection
Security/Interruption switch inside of vee-belt cover
CEE-Plug 17A, connected 1x230 V electric mains
.
Dimensions L/W/H 185 x 60 x 125 cm max.
Weight 440 –510 – 590 kg (depending on centre distance)
Paint grey-white RAL 9002/anthrazit RAL 7016
Warranty 1 year
Subject to change without notice
The machine meets the safety requirements and is CE-conform
To Next Page
Loading...