steinert KM 3100 SE - User Manual

OPERATING INSTRUCTIONS KM 3100 SE
STANDARD ACCESSORIES
PAGE 2
TECHNICAL DATA
PAGE 2
Liability
SETTING UP THE MACHINE
PAGE 2
Lifting and Moving
Standard version and extended version
ELECTRIC CONNECTION
Power requirement: 20 Ampere/2,25 kW, fuse protection with circuit breaker B16A
PAGE 3
WORKING WITH THE MACHINE
PAGE 3
Speed Regulation
Spindle Speed and workpiece diameter
Changing the direction of spindle rotation
Emergency off button
PAGE 4
Movable Control Box
Swivelling of headstock
Fine- Adjusting of headstock to “0” Position
Indexing
WORKING WITH CHUCKS
PAGE 5
Operating chucks, prong mandrel, live centre
Clamping the workpiece
Tool Rest
PAGE 6
Outrigger for turning with swivelled headstock
PAGE 6
SAFETY ADVICES AND REGULATIONS
PAGE 6
MAINTENCANCE
PAGE 6
ACCESSORIES AND OPTIONS
Copying Units, Laterial Turning Device, Ball Bearing Device
CE CONFORMITE
PAGE 8

Summary

LIABILITY

SETTING UP THE MACHINE

Lifting and Moving

Instructions for safely lifting and moving the machine using forklifts or pallet trucks.

ELECTRIC CONNECTION

SPEED REGULATION

Infinitely variable speed with 3 pulley-steps

Details on adjusting spindle speed using the V-belt pulley system and safety switch.

Regulation of spindle speed only while the spindle is running

Guidance on controlling spindle speed via inverter and speed regulation knob while the machine is running.

SPINDLE SPEED AND WORKPIECE DIAMETER

Information on maximum permissible peripheral speed and its relation to workpiece diameter.

CHANGING TURNING DIRECTION = ROTATION OF SPINDLE

Caution to meet safety regulations

Safety recommendations for changing spindle direction, including adjusting speed and chuck usage.

Advise

Note on potential blocking/disabling of turning direction function for training environments.

Emergency-Off-Button;Mainswitch

MOVABLE OPERATING BOX

Speed regulator or potentiometer = rotable knob

Explanation of the movable control box functions: speed adjustment via a rotatable knob.

Turning direction of spindle fwd;rev

Description of the controls for changing the spindle's forward and reverse turning direction.

SWIVELLING OF HEADSTOCK

loosen the headstock fixing lever on lefthand side of headstock

Procedure step for loosening the headstock fixing lever to allow swivelling.

take care of your fingers, do not squeeze them between lathe bed

Important safety warning regarding finger entrapment when swivelling the headstock.

STOP ADJUSTMENT FOR HEADSTOCK

FINE ADJUSTMENT OF HEADSTOCK FOR ZERO-POSITION TIP TO TIP

INDEXING SYSTEM AT SPINDLE

Safety Advice

Crucial safety warnings regarding the use of the indexing pin and spindle operation.

OPERATING CHUCKS. PRONG MANDREL AND LIVE CENTRE

CLAMPING THE WORKPIECE

Turning between centres with the 4-prong-mandrel and live centre

Instructions for securely clamping workpieces using a 4-prong mandrel and live centre.

Overhung turning with chucks

Procedures for clamping workpieces for overhung turning, with safety considerations.

TOOL REST

OUTRIGGER=EXTERNAL TURNING ATTACHMENT (Option)

SAFETY REGULATIONS

MAINTENANCE

ACCESSORIES, ATTACHMENTS, OPTIONS, COPYING UNITS

ORIGINAL DECLARATION OF CONFORMITY

CE-Konformitätserklärung; CE - Declaration of Conformity

steinert KM 3100 SE Specifications

General

Brand	steinert
Model	KM 3100 SE
Category	Lathe
Language	English