Need help?Do you have a question about the stellar labs SLA150 and is the answer not in the manual?
General| Brand | stellar labs |
|---|---|
| Model | SLA150 |
| Category | Amplifier |
| Language | English |
Manual on/off control of the amplifier.
Bi-color lamp provides immediate indication of amplifier status.
Buttons engage/disengage speaker pairs for parallel output.
Provides fine adjustment between left and right audio channels.
Provides volume trim adjustment for both channels relative to master level.
Accepts conventional line level signal from typical audio sources.
Defaults to this input when Line #1 is inactive; switches to Line #1 when signal is present.
Convenience feed-through from Line #2 input for daisy-chaining.
Accepts signal directly from another amplifier's speaker output.
Directs Speaker Level Input to either #1 or #2.
Independent Left/Right controls for main volume, used for setting system maximum.
Selects between stereo (two-channel) or bridged mono operation.
Allows external ON/OFF control via a 12VDC signal.
Provides 12VDC to control external devices from amplifier's ON/OFF operation.
Determines how the amplifier is switched on/off (Normal, Auto-On, Trigger).
Binding post set for speakers controlled by the "A" pushbutton.
Binding post set for speakers controlled by the "B" pushbutton.
Standard IEC AC power cord connection and fuse holder.
Allows selection between 115V and 230V for global use.
To Next Page