Page ii | Stellar
®
TMAX™ Owner’s Manual
NOTICE
Although clear data on cold weather performance from every steel
manufacturer is not available for all types and thicknesses of steel,
Stellar Industries is confident that the weldments on our products
will operate to 100% of their intended purpose to temperatures
down to -40° F / C.
It is recommended it Stellar manufactured equipment needs to be
used in temperatures below -40° F / C, the operator should pull
the unit into a climate-controlled area and allow the weldments
to warm up to and then maintain a temperature above this level.
WARNING
Operating, maintaining, and servicing a Stellar
product may expose you to chemicals including, but
not limited to, engine exhaust, carbon monoxide,
phthalates, and lead. These chemicals are known
to the State of California to cause cancer and birth
defects (or other reproductive harm). To keep your
exposure to a minimum, be sure to avoid breathing
exhaust and service your Stellar product in a well-
ventilated area while wearing gloves or washing
your hands frequently. For more information, go to
www.P65Warnings.ca.gov/passenger-vehicle.
www.p65/warning.ca.gov
P65 Warning & Cold Weather Notice
To Next Page
Loading...
