To Next PageTo Next Page
Need help?Do you have a question about the Step2 Splish Splash Seas Water Table 8507 and is the answer not in the manual?
General| Recommended Age | 1.5 years and up |
|---|---|
| Material | Plastic |
| Color | Multicolor |
| Style | Water Table |
| Manufacturer | Step2 |
| Model Number | 850700 |
| Features | Includes accessories |
Contact information for customer support and replacement parts.
Specifies the intended age range for product use.
General statements and warnings to reduce the risk of serious or fatal injury.
Instruction to retain the document for future use.
Alerts to small parts and sharp points, requiring adult assembly.
Warns of drowning risk with open water containers and mandates adult supervision.
States that adult assembly is necessary for the product.
Emphasizes that adult supervision is mandatory during use.
Children must not use the product before it is correctly assembled.
Indicates the maximum water capacity of the product.
Advises to bring the product indoors or avoid use below freezing temperatures.
Notes on screw design and tightening to ensure proper assembly.
Instructions for inspecting, securing connections, and replacing parts.
Guidelines for general cleaning and water hygiene.
Use mild soapy water for general cleaning of the product.
Frequent water changes and occasional sanitization to prevent bacterial growth.
Information on how to properly dispose of the product.
Guidance on recycling and complying with government regulations for disposal.
Invitation to participate in a customer survey via website.
Identification of component A used in assembly.
Identification of component B, noting there are three units.
Identification of component C used in assembly.
Identification of component D used in assembly.
Identification of component F used in assembly.
Identification of component J used in assembly.
Identification of component G used in assembly.
Identification of component H used in assembly.
Identification of component N used in assembly.
Identification of component M used in assembly.
Identification of component O used in assembly.
Identification of component P used in assembly.
Identification of component Q used in assembly.
Identification of component R used in assembly.
Identification of component S used in assembly.
Identification of component T used in assembly.
Identification of component U used in assembly.
Identification of component V used in assembly.
Hardware specification for twelve 1-7/8 inch screws.
Hardware specification for two 1/2 inch screws.
Hardware specification for two 5/8 inch screws.
Hardware specification for four 5/8 inch screws.
Instructions for attaching the support legs using part A and screws.
Securing the base structure using screws and part B.
Attaching the main legs to the base using screws.
Connecting upper components (J, I) to the base.
Installing a spinner component using screws.
Attaching the structure for the water wheel.
Securing the water wheel assembly with part N and H.
Attaching component M to the structure.
Securing components using screws.
Installing component O into its designated slot.
Connecting the upper section of the water table.
Securing the assembled parts using component A.
Guidance for steps requiring two people for assembly.
Instruction to hold components in place during assembly.
Instruction to hold components in place during assembly.
Securing a component with a screw.
Installing component S into its position.
Installing component D.
Ensuring correct orientation of parts V and T for safety.
Final placement of a component.
General instruction for snapping components together.
Visual check of assembled components.
Securing a component using part T.
Instructions for snapping components together.
Attaching a component to the main structure.
Installing component R.
Installing component P, likely the water wheel.
