What to do if there is only sound and no picture on my Steren Tuner?
If you're getting only sound from your Steren Tuner and no picture on the screen, it might be due to an incorrect connection of the AV cable. Ensure that you connect the AV cable correctly.
Why is my Steren Tuner remote control not working?
If your Steren Tuner's remote control isn't working, first, replace the battery with a new one. If that doesn't solve the problem, make sure you're using the remote control correctly and are close enough to the front panel of the Tuner.
What to do if there is no sound from the Steren Tuner speaker?
If there's no sound coming from the speaker of your Steren Tuner, check these things: 1. Ensure the audio cable is correctly connected. 2. Verify that the volume isn't muted; if it is, turn the volume control on. 3. Try selecting a different soundtrack, as the current one may be faulty.
What to do if my Steren Tuner display screen shows 'No signal'?
If your Steren Tuner display screen shows 'No signal,' it could be due to an incorrect setting. Connect the ISDB-T cable and set the correct parameter.
How to fix a Steren Tuner with no image?
If your Steren Tuner shows no image, make sure the power is turned on and that the ignition switch is lit. If not, turn on the power.
To Next Page
General