Steren AMP-040AR - Safety and Initial Setup; Important Safety Precautions

ENGLISH
ENGLISH-02
IMPORTANT
Before using your new Audio amplier, please read the following
recommendations.
Verify Line Voltage Before Use
Connecting the amplier to a line voltage other than that for which it
is intended can create a safety and re hazard, and may damage the
amplier.
If you have any questions about the voltage requirements for your
specic model, or about the line voltage in your area, contact your
selling dealer before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with your
unit. If a replacement cord is used, make certain that it is of a similar
gauge. We do not recommend using extension cords with this product.
As with all electrical devices, do not run power cords under rugs or
carpets or place heavy objects on power cords.
Damaged power cords should be replaced immediately with cords
meeting factory specications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always pull the
plug; never pull the cord. If you do not intend to use the amplier for a
considerable length of time, disconnect the plug from the AC outlet.