Steren BAF-150 - Installation

Before using your new Tripod Speaker Stand, please read
this instruction manual to prevent any damage. Put it away
in a safe place for future references.
INSTALLATION
1.- Unpack the tripod, carefully.
2.- Turn the security knob counterclockwise, then the legs will
move easily.
3.- Pull the support tube up. The legs will open.
4.- Place the tripod on the fl oor and when you have decided the
height of the tube, turn the knob clockwise.
5.- Turn the lock clamp counterclockwise to release the center
tube.
6.- Set the tube to required position. Note that exist a couple of
holes in both sides of the tube, these must be placed at least ½
centimeter above lock clamp.
ENGLISH
ENGLISH-2
Before usin
g
y
our new Tripod Speaker Stand, please read
t
his instruction manual to prevent an
y
dama
g
e. Put it awa
y
i
n a safe
p
lace for future references
.