What to do if my Steren Amplifier has no sound?
If your Steren Amplifier isn't producing any sound, first, verify that the volume level controls are appropriately adjusted to a normal level. Also, ensure that all connecting cables are securely plugged in at both ends.
The speaker box is powered by 110V~60Hz and has a 3500W maximum power output.
Features include independent volume, treble/bass settings, various mic inputs, and auxiliary line inputs.
Offers output line connectors for cascading and includes in-use/overload indicators.
Avoid exposing loudspeakers to moisture; use cover if outdoors.
Warranty is void if the case is opened, which may cause malfunctions.
Contact authorized dealers for revisions and avoid storing near wet places.
Warm up voice coils slowly in cold environments with a low-level signal.
Clean with a dry cloth; replace damaged power cords via manufacturer or qualified personnel.
Avoid prolonged exposure to excessive noise to prevent hearing damage.
Lists examples of sound levels and their associated decibel ranges for user awareness.
Identifies noises dangerous under constant exposure, such as rock concerts and jet planes.
Details on MIC 1/2 inputs (6.3mm, balanced) and their respective level controls.
Describes RCA and Cannon line-in jacks and 6.3mm/Cannon line-out jacks for connectivity.
Explains master volume, treble, and bass controls for overall sound adjustment.
Details overload and power indicators, along with the AC power input and fuse.
Describes the LCD screen and controls like Stop, Play/Pause.
Covers Next/Volume+ and Previous/Volume- functions for track selection and adjustment.
Details EQ/repeat functions, SD card slot, and USB connector for media playback.
Controls for Play/Pause, Stop, Mute, Repeat, and USB/SD source selection.
Functions for adjusting volume up/down and navigating tracks (Forward/Backward).
Includes EQ adjustment and information on the remote's battery compartment.
Connect polarized cable to power, then plug into speaker. Ensure switches are OFF.
Connect microphones to MIC inputs and audio sources to Line IN connectors.
Turn devices on, check LED indicator, set volume levels, and adjust tone frequencies.
Avoid placing mics near speakers; use LINE OUT for additional speakers or amplifiers.
The speaker can be placed on the floor, a tabletop, or a tripod stand.
Avoid corners to prevent muddy sound; corner placement increases low frequency output.
Placing against a wall also increases low frequency output, but less than corner placement.
Check volume levels and ensure all connecting cables are securely connected at both ends.
Check connection polarity between loudspeaker and auxiliary equipment.
Adjust volume, check placement, and ensure all connecting cables are secure.
Details amplifier input/output power, connector types (Cannon, 6.3mm, RCA), and THD.
Provides woofer diameter, impedance, power output, coil diameter, magnet, frequency response, and sensitivity.
Lists tweeter diameter, impedance, power output, coil diameter, magnet, frequency response, and sensitivity.
Product is warranted for one year against defects in workmanship and materials under normal usage.
Details requirements for warranty service, repair time, and parts availability.
Lists conditions that void the warranty, such as accidents, mishandling, and unauthorized repairs.
Fields for recording retailer name, address, product, brand, part/serial number, and date of delivery.
Contact nearest dealer for failures; a Call Center is available for assistance in Mexico.
To Next Page
General
