EasyManua.ls Logo

Steren CCTV-970 - Page 23

Steren CCTV-970
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
12. EXTRA: For the future use.
13. Playback controls:
• : Increase reverse playback speed 2X, 4X, 8X,16X,32X.
• : Press to start playback.
• : Press to increase forward playback speed 2X,4X, 8X,16X,32X.
• : Press to slow playback speed by 1/2, 1/4, 1/8, 1/16,1/32.
• : Press to freeze playback to one frame, then press again to advance frame-by-frame.
14.AUDIO/MUTE: Turn on/off audio
Use Remote controller to select the device number:
1. Press [LOGIN/LOCK] key, and enter device number, then you can control the device
by this remote control (device number is available in [PASSWORD] For example. Select
the device with number “000001”. Press [LOGIN/LOCK]+[1],then the remote controller can
control this device.
Note:
1. Remote controller can control the device with number “000000” as default.
2. If press [LOGIN/LOCK]+[0], then the remote controller can control device with any number.
3. The number of device should be smaller than 000255.