Need help?Do you have a question about the Steren COM-597 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | CMOS |
| Scanner type | 1D/2D |
| Read rate (max) | 200 reads/s |
| Maximum scan area | 300 x 300 mm |
| Scanner resolution | 39.5 mm |
| Linear (1D) barcodes supported | Code 128, Code 32, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar Expanded, GS1 DataBar Omnidirectional, Industrial 2 of 5, Interleaved 2 of 5, JAN, U.P.C. |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, Micro QR Code, MicroPDF417, QR Code |
| Input voltage | 5 V |
| Power consumption | 300 mA |
| USB version | 2.0 |
| Standard interfaces | RS-232, USB |
| Connectivity technology | Wired |
| Product color | Black |
| Housing material | Acrylonitrile butadiene styrene (ABS), Polystyrol, Thermoplastic urethane (TPU) |
| Built-in processor | Yes |
| International Protection (IP) code | IP54 |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Cables included | USB |
Weight and Dimensions| Weight | - g |
|---|
Details on power, interface, sensor, illumination, processor, resolution, depth of field, and scan speed.
Information on scan area, contrast support, scan angle, IP protection, operating/storage temperatures, and materials.
Essential reading for product safety and proper handling, including warnings about use and environmental factors.
Key precautions for safe operation, such as keeping away from children, avoiding extreme temperatures, and eye safety.
Step-by-step guide to assemble the base and connect the reader to a computer via USB for automatic driver installation.
Instructions on how to aim, activate the laser, and maintain the correct distance for successful barcode reading.
Overview of configuration codes, factory defaults, ON/OFF settings, and aiming beam modes for optimal scanning.
Customizing LED light behavior, beep sound for successful reads, and selecting the USB or RS232 interface.
Setting RS-232 baud rates, adding suffixes to scanned data, and selecting scanning modes like manual trigger or auto sensing.
Adjusting reading interval times, single scan duration, and image stable time for improved performance.
Selecting keyboard language, viewing version info, and configuring barcode type availability and rotation.
To Next Page
