Need help?Do you have a question about the Steren DIS-150 and is the answer not in the manual?
General| Brand | Steren |
|---|---|
| Model | DIS-150 |
| Category | Lighting Equipment |
| Language | English |
Connect the panel to power and computer for initial setup and operation.
Insert the installation CD into the PC and execute the SETUP file.
Provide necessary permissions during the installation if prompted by the operating system.
Click the 'INSTALL' button in the driver setup window.
Click 'OK' after the driver has been successfully pre-installed.
Identify the specific USB port the panel is connected to via Device Manager.
Locate and open the MiniLEDDisplayEditorV2 application from the installation media.
Set the correct COM port in the application settings where the panel is connected.
Overview of the Mini LED display editor interface elements.
Utilize commands like <CR> for red, <CG> for green to color text.
Use <L1> and <L2> commands for multi-line messages.
Send messages to the panel and confirm reception.
Mark and drill holes, then insert anchors and screws for mounting.
Place supports on the panel and screw firmly, then mount the panel onto screws.
Commands must be capitalized without spaces, avoiding accents and special characters.
Description of available animation modes like Appear, Scroll Up, Shift, Scroll Down, and Flash.
Details on power input, dimensions, and power converter ratings.
Product name, part number, and brand.
Requirements and terms for claiming warranty service.
Circumstances under which the product warranty becomes invalid.
To Next Page