What to do if my Steren Multimeter doesn't show any measurement?
If your Steren Multimeter isn't displaying any measurements, try the following: * Ensure the multimeter is turned on. * Check the 9V battery. * Make sure you've selected the appropriate scale using the knob. * Verify that the cables are correctly connected.
General| Type | Digital |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Display | 3 1/2 digit LCD |
| Battery | 9V |
| Transistor Test | Yes |
| DC Voltage Range | 200mV to 600V |
| AC Voltage Range | 200V to 600V |
| DC Current Range | 200µA - 10A |
| Resistance Range | 200Ω to 2MΩ |
Specifications for DC voltmeter ranges, resolutions, accuracy, input impedance, and overcharge protection limits.
Specifications for AC voltmeter ranges, resolutions, accuracy, frequency range, and overcharge protection limits.
Specifications for DC ammeter ranges, resolutions, accuracy, and protection against overcharge.
Specifications for AC ammeter ranges, resolutions, accuracy, frequency range, and protection against overcharge.
Specifications for ohmmeter ranges, resolutions, and accuracies.
Details test conditions and accuracy for diode and continuity testing, including overcharge protection.
Details test conditions and accuracy for transistor (hFE) testing.
Steps for connecting test leads and setting the dial for measuring DC and AC voltage.
Instructions for connecting test leads and setting the dial for measuring DC and AC current, with fuse protection notes.
Steps for connecting test leads and setting the dial to measure resistance, including handling over-range indications.
Instructions for connecting test leads and setting the dial to test diodes, including over-range indications.
Steps for connecting test leads and setting the dial to measure audible continuity, including buzzer behavior.
Steps for setting the dial and determining transistor type for hFE measurement.
To Next Page
