Need help?Do you have a question about the Steren WR-050 and is the answer not in the manual?
Guidelines for safe operation, including avoiding physical damage, environmental hazards, and liquids.
Highlights the system's dual microphone capability, operational range, and interference-free performance.
Identifies the power switch and volume controls for Channel 1 and Channel 2.
Details receiver antennas and the balanced audio output (XLR) connector.
Details the 6.3mm audio output, power cord, input connector, LED indicator, volume control, and antenna.
Explains the ON/OFF switch, ON/MUTE switch, and the clip for attachment.
Details the location and access for the microphone's battery compartment.
Explains the function of the power ON/OFF switch and the mute switch.
Step-by-step guide for opening the compartment and inserting a 9V battery, noting polarity.
Instructions for connecting receiver to amplifier, positioning antennas, and powering on devices.
Guidance on adjusting the volume level according to user needs after system activation.
Details frequency range, stabilization, deviation, dynamic range, distortion, and response frequency.
Lists input power, signal/parasite rejection, channel border rejection, and microphone modulation/power.
Covers the one-year warranty against defects in workmanship and materials.
Outlines requirements for claims and conditions that void the warranty, such as damage or misuse.
To Next Page
General