Sterilor EVOLUTION SYSTEME 7 SEL EVO - Electrolysis Side Configuration; The Box Is Configured Depending on the Installed Electrode Model; Configuration of the Reverse Polarity Time Adapted to the Water Hardness

12
12. Electrolysis side configuration
12.1 The box is congured depending on the installed electrode model
Your appliance has been factory congured for the supplied electrode.

Electrode model indicated on the QR code on the support plate:
Electrode Number of plates DC Amps

3
3 

3
5 

3
 

3
9 

3
11 

3
13 




 
 
 
 
 
 
12.2 Conguraon of the reverse polarity me adapted to the water hardness
Your appliance has been congured for 25° f.
Polarity reversal every hour.





Hardness Reversal me
 
 
 
 
 

 
 
 
 
 
 
ELEC
EAU