EasyManua.ls Logo

Steris HarmonyAIR G Series User Manual

Steris HarmonyAIR G Series
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR MANUAL
HarmonyAIRâ„¢ Surgical Lighting System
G Series
(Rev. G) 10043124

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Steris HarmonyAIR G Series and is the answer not in the manual?

Steris HarmonyAIR G Series Specifications

General IconGeneral
BrandSteris
ModelHarmonyAIR G Series
CategoryLighting Equipment
LanguageEnglish

Summary

Safety Precautions

Installation Verification and Technical Specifications

Pre-operation Checklist

Checklist to verify installation completeness and correctness for safe operation.

Check Suspension Movement

Verify suspension system moves smoothly through articulations without binding.

Check System Operation

Verify electrical power to control center and function of touch pads and controls.

Check Optional Video Camera Operation

Check Optional Monitor Support Arms

HarmonyAIR G5 Lighthead Optical Performance

Essential Performance

Environmental Conditions

Power Requirements

Operating Instructions

Intensity Controls

Adjust lighthead intensity using wall control or surgeon's control buttons.

Activate HarmonyAIR Surgical Lighting System G Series

Wall Control Unit

Surgeon's Intensity Control Buttons

G5 Lighthead Module Status Indications

G5 Lighthead Positioning

G5 Lighthead Pattern Adjustment

Lighthandles

Plastic Lighthandle and Disposable Lighthandle Cover

Instructions for using and covering the plastic lighthandle.

Sterilizable Surgeon Control Handle

Information on the sterilizable handle, cleaning, and sterilization.

Monitor Arms

Video Camera Installation or Removal

Install Disposable Sterile Camera Cover

Video Camera Operation

Zoom

Explains the zoom function for adjusting image field detail.

Rotate

Explains the rotate function for changing video field orientation.

Brightness

Auto Brightness

Manual Brightness

Guidelines for Maximizing Video Image

Manual Focus

Manually set focus, toggling Auto Focus off.

Auto Focus

Toggle Auto Focus on/off for automatic camera focusing.

ACT Enabled System

Cleaning the Equipment

Cleaning Equipment

Recommended equipment and supplies for cleaning the surgical lighting system.

General Cleaning/Disinfecting Procedure

Areas To Be Cleaned Before Each Use

Operator Troubleshooting

Operator Troubleshooting Table

Table identifying common problems, causes, and corrections.

Wall Control Faults

Maintenance

Preventive Maintenance

Importance and requirements for regular service and maintenance.

Inspect Suspension

Procedure to inspect suspension arms for proper operation and adjust brakes.

Inspect Wall Control

Optional Service Disconnect Switch

Replacement Parts

Waste Disposal Guidelines

Appendix - EMC Compliance Technical Data