Do you have a question about the Steris InnoWave IWULTRA and is the answer not in the manual?
Intended Use | Jewelry cleaning |
---|---|
Ultrasonic Frequency | 42 kHz |
Power Consumption | 35W |
Material | Stainless Steel |
Power Supply | AC 110-120V, 60Hz |
Details important safety precautions to be observed when operating or servicing the equipment.
Lists the required Personal Protective Equipment (PPE) for operating or servicing the equipment.
Detailed instructions for connecting the drain hose to the equipment and a site drain.
Instructions on how to fit and maintain the recirculation filter in the tank drain.
Procedure for connecting and switching on the electrical power supply to the equipment.
Describes the instrument basket, its flush ports, and the types of instruments it can process.
Instructions on how to safely remove the instrument basket from the equipment's tank.
Guidance on how to properly load general (non-cannulated) instruments into the basket.
Instructions for attaching cannulated instruments to basket flush ports for effective flushing.
Steps for safely removing instruments from the basket after the wash cycle.
Overview of the touchscreen display functions for adjusting parameters and operating the equipment.
Procedure for entering a personal identification number (PIN) to unlock main menu controls.
A flow diagram detailing the steps involved in performing a complete wash cycle.
Instructions on placing the instrument basket correctly into the equipment's tank.
How to adjust wash cycle parameters such as temperature, degas, and wash duration.
Procedure for filling the equipment's tank with water, considering temperature and cleaning.
Instructions on how to add cleaning chemicals safely to the equipment's tank.
Conditions and steps required to start a wash cycle on the equipment.
Procedure to follow when a wash cycle has successfully completed.
Instructions on how to pause or abort an ongoing wash cycle.
Details how the equipment handles errors, emits alarms, and displays error messages.