STERNO HOME GL42077 - User Manual

READ, FOLLOW AND SAVE THESE INSTRUCTIONS
Solar Powered
path light
MODEL #GL42077
DEAR CUSTOMER,
Congratulations on your purchase of a STERNO HOME
™
lighting product. Our products will help to enhance the beauty of your home and provide
many years of enjoyment. STERNO HOME
™
offers a wide selection of lighting products of the highest professional quality. Ask your dealer about
the many other STERNO HOME
™
products that will help to create your own paradise.
To ensure the maximum performance of your garden light, please read and save these instructions.
Replacement parts may be ordered by using the fixture model number and the part’s name.
1. How your Solar Powered Fixture works
CUSTOMER SERVICE
1-888-867-6095 • customerservice@sternohome.com • www.sternohome.com
5021-GL42077-EN-062619
During the day, the solar panel converts sunlight into electricity and recharges the battery / batteries. At night, the light turns on
automatically using the electricity stored during that day.
The number of hours the light stays on depends on your geographical location, weather conditions and seasonal sunlight availability.
Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the
battery / batteries to charge fully and will reduce the hours of nighttime lighting. The selected location should not be near nighttime light
sources, such as porch lights, street lights or pool lights, as these may cause the solar light to turn off prematurely.

Summary

How Your Solar Powered Fixture Works

Solar Panel Operation

Explains how the solar panel converts sunlight to electricity for nighttime use.

Optimal Placement

Recommends placing the light in direct sunlight for at least 8 hours daily.

Avoiding Light Interference

Advises against placing the light near other light sources to prevent premature shut-off.

Initial Setup and Assembly

First Time Use Preparation

Instructions for removing protective film and setting the switch to ON.

Fixture Assembly Steps

Details on attaching the top cap, lens, and plastic spike to the post.

Installation Guidance

Tips for inserting the fixture into different soil types and avoiding damage.

Troubleshooting and Maintenance

Light Not Turning On

Troubleshooting steps for when the light does not activate at dusk.

Battery Replacement Procedure

Guide on how to safely replace the rechargeable battery.

Safety Precautions and Warranty

Battery Handling Cautions

Important warnings regarding battery polarity, mixing, disposal, and charging.

Limited Warranty Information

Details on the one-year limited warranty and customer service contact.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

This document describes the Sterno Home Solar Powered Path Light, Model #GL42077, a lighting product designed to enhance outdoor spaces.

Function Description

The Sterno Home Solar Powered Path Light is an outdoor lighting fixture that operates autonomously using solar energy. During the day, its integrated solar panel converts sunlight into electricity, which is then stored in rechargeable batteries. At night, the light automatically illuminates, drawing power from the stored electricity. This design provides an energy-efficient and convenient lighting solution for gardens, pathways, and other outdoor areas, contributing to both aesthetics and safety. The product is part of a wider selection of Sterno Home lighting products aimed at creating a cohesive outdoor lighting scheme.

Important Technical Specifications

• Model Number: GL42077
• Power Source: Solar-powered with rechargeable batteries.
• Battery Type: AA size 1.2V, Ni-Mh, 800 mAh rechargeable battery (one battery is mentioned in the replacement section, but the text also refers to "battery/batteries" implying potential for multiple depending on the specific model variant or future iterations).
• Charging Requirement: Requires at least 8 hours of direct sunlight daily for optimal performance and maximum battery capacity.
• Operation: Automatic dusk-to-dawn operation, turning on at night and off during the day.
• Outdoor Use: Designed for safe outdoor operation.

Usage Features

Installation: The path light features a straightforward assembly and installation process.

1. Fixture Assembly:
   • Attach the top cap onto each lens by pressing it downward.
   • Attach the lens to the post by pressing them together.
   • Attach the plastic spike to the post by pressing them together.
2. Placement: The solar light fixture should be placed in an area that receives a minimum of 8 hours of direct sunlight daily. This ensures the battery/batteries can fully charge and provide maximum nighttime illumination.
3. Location Considerations:
   • Avoid shadowed locations, as these will hinder full battery charging and reduce nighttime lighting hours.
   • Do not place the solar light near other nighttime light sources (e.g., porch lights, street lights, pool lights), as these may cause the solar light to turn off prematurely due to its photocell sensor.
4. First-Time Use:
   • If a protective film covers the solar panel, it must be removed before use.
   • The switch should be set to the "ON" position.
5. Spike Installation Tips:
   • Loose, sandy, or organic soil: Grasp the post with both hands near the spike and firmly push it into the ground.
   • Hard soil: Pour water onto the ground to soften it before insertion.
   • Stony soil: Soften the ground with a rake or shovel, remove large rocks, dig a small hole, insert the fixture spike, replace the soil, and tap down.
   • Crucial Warning: Never push the fixture into the ground by the fixture head to prevent damage.

Troubleshooting (If the light does not turn on at dusk after 8 hours of charging):

• Sunlight Exposure: Verify that the solar light is in a bright, sunny location and not in a shady area during the day.
• Light Interference: Ensure the light's photocell is not affected by other light sources at night.
• Switch Position: Confirm that the switch is in the "ON" position.
• Battery Contact & Polarity: Check that the battery/batteries are making proper contact with the terminal and have been inserted with the correct polarity.

Maintenance Features

Battery Replacement: Battery replacement should ideally be performed in the morning on a sunny day to allow for immediate recharging.

1. Access: Remove the top cap by pulling it upwards.
2. Unscrew: Remove the 3 screws securing the battery cover.
3. Replace: Remove the old 800 mAh battery and replace it with a new AA size 1.2V, Ni-Mh, 800 mAh rechargeable battery.
4. Cleaning: Clean the battery contacts and those of the device prior to battery installation.
5. Polarity: Ensure the new battery is inserted in the proper direction.
6. Reassembly: Replace the battery cover, then replace the top cap by pushing it downwards.

Battery Cautions:

• Polarity: Failure to insert the battery in the correct polarity can shorten battery life or cause it to explode or leak.
• Mixing Batteries: Do not mix old and new batteries. Replace all batteries of a set at the same time.
• Battery Types: Do not mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium or Nickel Metal Hydride) batteries.
• Disposal: Do not dispose of batteries in fire. Batteries should be recycled or disposed of according to manufacturer's recommendations.
• Storage: Remove batteries if consumed or if the product will be left unused for a long period.

Replacement Parts: Replacement parts can be ordered by using the fixture model number (GL42077) and the specific part's name.

Warranty: The product comes with a one (1) year limited warranty covering defects in material and workmanship from the date of purchase (excluding the battery/batteries). Customers can contact customer service with proof of purchase for assistance. The warranty allows for a refund or replacement if a defective part cannot be replaced. It's important to note that damage from accident, misuse, or improper installation is not covered. The consumer is responsible for the removal and reinstallation of the product. The warranty does not cover incidental or consequential damages.

STERNO HOME GL42077 Specifications