STERWINS 1000 DW-3 User Manual

1000 DW-3
FR / Notice de Montage
ES / Instrucciones de montaje
PT / Manual de montagem
IT / Istruzioni di montaggio
EL / Οδηγίε Συναρολόγηση
PL / Instrukcja montażu
RU /   
UK /   
RO / Instrucţiuni de montare
EN / Assembly instructions
2015-04
3276005143500
Traduction de la version originale du mode d’emploi - Pompe eaux usées 1000W Inox / Traducción de las Instrucciones originales - Bomba de aguas residuales 1000W
Inox / Tradução das Instruções Originais - Bomba de águas sujas e residuais 1000W Inox / Traduzione delle istruzioni originali - Pompa per acque sporche 1000W Inox /
Μετάφραση των πρωτότυπων οδηγιών - Αντλία ακάθαρτων υδάτων 1000W Inox / Tłumaczenie instrukcji oryginalnej - Pompa do brudnej wody ze stali nierdzewnej
1000 W / Перевод оригинала инструкции - Насос для грязной воды - 1000Вт - нержавеющая сталь / Переклад оригінальної інструкції - Насос для брудної
води - 1000Вт - нержавіюча сталь / Traducerea instrucţiunilor originale - Pompă de apă murdară 1000W Inox / Original Instructions - Dirty water Pump 1000W Inox
ASSEMBLY_PUMP_1000 DW-3.indd 1ASSEMBLY_PUMP_1000 DW-3.indd 1 14/04/15 15:0014/04/15 15:00

STERWINS 1000 DW-3 Specifications

General

Maximum immersion depth	7 m
Power	1000 W
Voltage	230 V
Frequency	50 Hz
Cable Length	10 m
Maximum flow rate	14000 l/h
Max Flow Rate	14000 l/h

Summary

Operation Guide

Before Starting

Prepare the pump and environment before initiating operation.

Starting Properly

Ensure correct setup and connection for safe and effective pump operation.

Minimum Water Level

Ensure the water level is at least 45 cm for pump activation.

Electrical Connection

Connect the pump's power cable to the electrical outlet securely.

On/Off Operation

Operate the pump by monitoring the float switch for water level changes.

Maintenance

Pump Connection

Connect the pump to the water source and power supply for maintenance.

Disassembly

Dismantle pump components, such as the housing and impeller, for inspection or repair.

Cleaning

Clean pump parts thoroughly with water and a brush to remove debris.

Reassembly

Reassemble the pump securely after cleaning or repairs are completed.