To Next PageTo Next Page
Need help?Do you have a question about the STERWINS 900 JET AUTO-3 and is the answer not in the manual?
General| Model | 900 JET AUTO-3 |
|---|---|
| Category | Water Pump |
| Power | 900 W |
| Maximum Delivery Head | 45 m |
| Maximum Suction Height | 8 m |
| Maximum Pressure | 4.5 bar |
| Inlet Diameter | 1 inch |
| Outlet Diameter | 1 inch |
| Cable Length | 1.5 m |
| Power Supply | 230 V / 50 Hz |
| Housing Material | Cast Iron |
| Impeller Material | Noryl |
| Protection Class | IPX4 |
| Type | Jet Pump |
| Maximum Flow Rate | 60 L/min |
| Connection Inlet | G1 |
| Connection Outlet | G1 |
Instructions for preparing the intake line for the pump, including hose and filter recommendations.
Guidance on connecting the discharge line, including hose size and shut-off mechanisms.
Details on the pressure control unit features, including inlet/outlet and security systems.
Explanation of the pressure control unit's indicators: Power On, Failure, Pump On, and Restart.
Steps for placing the pump on a stable surface and removing protective caps before setup.
Instructions for connecting the intake line, emphasizing a tight seal and potential filter use.
Procedure for filling the pump with water to expel air and ensure proper priming.
Steps to connect the discharge line, including installing the pressure control unit and ensuring seal rings.
Guidance on connecting the power supply and initial operation steps for priming the pump.
Details on the pump's automatic functions, overheating protection, and priming time.
Instructions for clearing pump blockages by flushing the system with water.
Steps for draining and storing the pump to protect it from frost and ensure rotor function.
