EasyManua.ls Logo

STERWINS 135C EPW.3 User Manual

STERWINS 135C EPW.3
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
135C EPW.3
150C EPW.3
Traduction de la version originale du mode d’emploi / Traducción de las Instrucciones originales / Tradução das Instruções Originais / Traduzione delle istruzioni originali /
Μετάφραση των πρωτότυπων οδηγιών / Tłumaczenie instrukcji oryginalnej / Перевод оригинала инструкции / Переклад оригінальної інструкції / Traducerea instrucţiunilor
originale / Original Instructions
FR
ES
PT
IT
EL
PL
RU
UK
RO
EN
Notice de Montage -
Utilisation - Entretien
Instrucciones de Montaje,
Utilización y Mantenimiento
Instruções de Montagem,
Utilização e Manutenção
Istruzioni per il Montaggio,
l'Uso e la Manutenzione
Εγχειρίδιο συναρμολόγησης,
χρήσης και συντήρησης
Instrukcja Montażu,
Użytkowania i Konserwacji
Руководство По Сборке
и Эксплуатации
Керівництво По Збірці
і Експлуатації
Manual asamblare,
utilizare și întreținere
Assembly - Use -
Maintenance Manual
135C EPW.3 EAN CODE : 3276000229704
150C EPW.3 EAN CODE : 3276000229728
2016/09
Question and Answer IconNeed help?

Do you have a question about the STERWINS 135C EPW.3 and is the answer not in the manual?

STERWINS 135C EPW.3 Specifications

General IconGeneral
BrandSTERWINS
Model135C EPW.3
CategoryPressure Washer
LanguageEnglish

Summary

Product Components Identification

Preparation - Water Inlet and Spray Gun Assembly

Connecting Water Inlet Hose

Connect the garden hose to the device water inlet.

Assembling Spray Gun and Lance

Connect the spray gun, lance, and nozzle for operation.

Preparation - Hose and Nozzle Function

Connecting High-Pressure Hose

Connect the high-pressure hose to the spray gun.

Nozzle Spray Patterns

Illustrates various spray patterns produced by the nozzle.

Preparation - Water Supply and Pump Priming

Connecting to Water Source

Connect the water inlet hose to a tap or container.

Priming the Pump

Prime the pump by flushing water through the system.

Preparation - Detergent System Setup

Installing Detergent Container

Place the detergent container in the designated holder.

Preparation - Detergent System Operation

Connecting Detergent Tube

Connect the detergent suction tube to the unit.

Filling Detergent Tank

Fill the detergent tank with cleaning agent.

Operation - Powering On

Connecting to Power and Turning On

Connect the power cord and turn the unit ON.

Operation - Using the Spray Gun

Activating and Deactivating Spray

Squeeze trigger to spray, release to stop.

Operation - Powering Off

Turning Off and Disconnecting

Turn the unit OFF and disconnect the power plug.

Maintenance - Cleaning Components

Cleaning the Spray Gun and Lance

Rinse the spray gun and lance after use.

Cleaning the Water Inlet Filter

Clean the water inlet filter with water.

Maintenance - Inspection

Inspecting Components for Wear

Check components like filters and hoses for wear or damage.

Winter Storage - Preparation

Draining the System

Drain all water from the pressure washer and hoses.

Adding Anti-Freeze

Add anti-freeze to protect the pump from freezing.

Winter Storage - Flushing and Power

Flushing System with Anti-Freeze

Flush the system with anti-freeze solution.

Powering Off After Storage Prep

Turn the unit OFF after preparing for storage.

Winter Storage - Final Steps

Disconnecting and Storing Hoses

Disconnect and store hoses and accessories properly.

Winter Storage - Finalizing

Final Disconnection and Storage

Final steps for storing the pressure washer.

Safety Information and Warnings

General Danger and Caution Notices

Highlights general danger, attention, and caution notices.

Connection and Power Status Symbols

Explains symbols for connected, disconnected, and power status.

Maintenance and Correctness Symbols

Defines symbols for maintenance and correct/incorrect operations.

Related product manuals