322
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
BR
EN
• Check the trimming spool regularly for damage, and if damaged repair
immediately.
• Switch the product o when the trimming spool is blocked. Remove the battery
pack and remove the blockage. Inspect the spool for damage before using the
product again.
2.11 BRUSH CUTTER SAFETY WARNINGS
• Use this brush cutter only for the purposes it was designed, do not aim the brush
cutter at any people or animals.
• Remove the battery during transportation and during storage.
• Store brush cutters indoors – when not in use, brush cutter should be stored
indoors in dry, locked-up place – out of reach of children.
• Keep all parts of the body away from the cutting blade. Make sure the switch is
o when clearing jammed material. A moment of inattention while operating the
brush cutter may result in serious personal injury.
• Always inspect the tool before use, and after any impact, check for sign of wear or
damage and repair as necessary,especially the parts of the cutting head.
• Carry the brush cutter by the handle with the cutting blade stopped. Proper
handling of the brush cutter will reduce possible personal injury from the cutting
blade.
• Hold the power tool by insulated gripping surfaces only, because the cutter
blade may contact hidden wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric
shock.
• Hold the brush cutter properly, with both hands. Loss of control can cause
personal injury.
• Keep hands and feet away from the cutting device at all times and especially
when switching the product on.
• Always be sure of a safe and secure operating position, whilst using the product.
• Never use the product standing on steps or a ladder. Do not work over should
height.
• Always ensure the safety guard supplied is tted before using the product.
Never attempt to use an incomplete product or one tted with an unauthorised
modication.
To Next Page
Loading...
