To Next Page

To Previous Page

334

• Even if all instructions are strictly followed, there are still some factors that could lead to

hazards, such as :

- Thrown out pieces of the work piece.

- Vibration injuries : use designated handles and try to reduce working time and

exposure.

- Injuries caused by noise : wear ear protection and reduce working time and exposure.

- Inhalation of dust and particles.

- Wear eye protection at all times.

If you experience any of these factors while using the machine, stop the machine consult

your doctor immediately

• Injuries may be caused or aggravated by prolonged use of a tool. When using any tool

for prolonged periods, ensure you take regular breaks.

• Prolonged use of the product exposes the user to vibrations that can cause a range of

conditions collectively known as hand-arm vibration syndrome (HAVS) e.g. ngers going

white; as well as specic diseases such as carpal tunnel syndrome.

• To reduce this risk when using the product, always wear protective gloves and keep your

hands warm.

3. TECHNICAL DATA

Model 40VCS2-34.1

Rated voltage (V d.c.) 36 V d.c.

Oil tank capacity 120 ml

Max Chain Speed 15m/s

Saw Chain 14 inches

Saw Chain model 91PJ052X

Guide bar model 140SDEA041

Guide bar length 415 mm

Max. cutting length 340 mm

Oil type Anti-wear hydraulic oil

Oil control Automatic

Machine weigh (including battery pack) 5.29 kg with 40VBA2-50.1

Measured sound pressure level (dB(A)) 90 dB(A) K=3 dB(A)

Measured sound power level (dB(A)) 101dB(A), K=3dB(A)

Working current 30-40 A

Maximum current 45 A

Recommended protection Over current protection

Vibration level (K=1.5m/s2) 1.867 m/s2

STERWINS 40VCS2-34.1 User Manual

Questions and Answers: