8.EXPLODED VIEW WITH PARTS LIST
POS DESCRIPTION POS DESCRIPTION POS DESCRIPTION
1 Screw 10.11 Screw 20.6 Screw
2 Right housing assy 10.12 Bearing 21 Left housing assy
2.1 Right cover 10.13 Rotor assy 21.1 Left cover
2.2 Right housing 10.14 Bearing 21.2 Left housing
2.3 Screw 10.15 Aluminum bracket 21.3 Screw
3 Plug base assy 10.15.1 Gear shaft 22 Screw
3.1 Plug base 10.16 Screw 23 Guard
3.2 Plug and connection wire assy 11 Gasket 24 Screw
3.3 Fixing base 12 Blade gear assy 25 Nut
3.4 Screw 12.1 Gear 26 Sweep board
4 Rear trigger 12.2 Eccentric gear 27 Blade cover
5 Switch spring 12.3 Blade assy 28 Bottom cover assy
6 Rear rotational rod 12.3.1 Blade protector 28.1 Screw
7 Steel wire rod 12.4 Gasket 28.2 Gasket
8 Rotational rod 12.5 Gasket 28.3 Fixing base
9 Reset spring 12.6 Pin 28.4 Bottom cover
10 Motor and connection wire
assy
13 Gasket 29 Screw
10.1 Switch and connection wire
assy
14 Bolt sleeve
10.1.1 Switch 15 Indicator cover
10.1.2 Connection wire assy 16 Top cover
10.2 Female terminal 17 Screw
10.3 Heat-shrinkable tube 18 Pressing plate
10.4 Copper strip 19 Screw
10.5 Heat-shrinkable tube 20 Front handle assy
10.6 Screw 20.1 Upper handle
10.7 Carbon brush 20.2 Nut
10.8 Carbon brush holder 20.3 Spring
10.9 Stator assy 20.4 Front trigger
10.10 Bracket 20.5 Lower handle
56
EN
To Next Page
Loading...
