STERWINS 25EGT1-300.1

Questions and Answers:

K
Katie CareyAug 16, 2025
Why won't my STERWINS 25EGT1-300.1 engine start?
- E
  eric09Aug 17, 2025
  There are several reasons why your STERWINS Trimmer engine might not be starting: * The power cable could be defective; in this case, check the integrity of the power cable and replace it if necessary. * The trigger might be defective; if so, replace the trigger. * The power supply could be defective; check your electrical network. * The self-protection mode of the machine may be activated; wait for the product to recover.
M
matthewscottAug 19, 2025
What to do if my STERWINS Trimmer has abnormal vibration?
- M
  Mark SmithAug 19, 2025
  If your STERWINS Trimmer is vibrating abnormally, here's what you can do: * Check if the nuts and screws are tightened properly. If not, tighten them. * Inspect the spool for any damage. If the spool is damaged, replace it.
D
Debra MaldonadoAug 22, 2025
How to fix poor trimming quality with my STERWINS Trimmer?
- K
  Kyle PopeAug 22, 2025
  If you're experiencing poor trimming quality with your STERWINS Trimmer, consider the following: * Check if there is still line on the spool and change the line if needed. * The automatic system of the spool might be defective, so replace it with a new one.
A
Andrea TaylorAug 25, 2025
Why is my STERWINS 25EGT1-300.1 Trimmer engine lacking power?
- J
  Jim JonesAug 26, 2025
  If the engine of your STERWINS Trimmer lacks power, it could be that the carbon brushes are about to be consumed. Replace the carbon brushes, spring, and support.
D
David HallAug 28, 2025
Why is my STERWINS 25EGT1-300.1 Trimmer making excessive noise?
- M
  Melissa LopezAug 28, 2025
  Excessive noise from your STERWINS Trimmer can often be attributed to loose nuts or screws. Make sure to tighten all nuts and screws.
T
Tyler ThompsonAug 30, 2025
What to do if my STERWINS 25EGT1-300.1 engine won't stop?
- L
  Leonard JacksonAug 30, 2025
  If your STERWINS Trimmer engine won't stop, the OFF switch may be defective. Test the switch and replace it with a new one if necessary.
T
Tanya FrancisSep 1, 2025
What to do if my STERWINS Trimmer does not start?
- M
  Michelle BrownSep 2, 2025
  If your STERWINS Trimmer won't start, several factors could be responsible. First, the power cable might be defective, in which case you should check its integrity and replace it if necessary. Second, the trigger could be faulty and needs replacement. Third, the power supply may be defective, so check your electrical network. Finally, the self-protection mode of the machine might be activated; simply wait for the product to recover.
N
Nicole BallardSep 5, 2025
Why is my STERWINS Trimmer giving a poor trimming quality?
- A
  Adam GarciaSep 5, 2025
  If you're experiencing poor trimming quality with your STERWINS Trimmer, it could be due to a couple of reasons. First, check if there is no more line on the spool and change the line if needed. Second, the automatic system of the spool might be defective, requiring you to replace it.
J
Jorge SmithSep 7, 2025
How to fix abnormal vibration in my STERWINS Trimmer?
- T
  Terry KimSep 7, 2025
  Abnormal vibration in your STERWINS Trimmer can stem from a couple of issues. Start by checking if any nuts or screws are loose and tighten them accordingly. Additionally, inspect the spool for any damage and replace it if necessary.
S
Stephen ReidSep 12, 2025
Why does the STERWINS Trimmer engine lack power?
- D
  Dr. Kristy WheelerSep 12, 2025
  If the engine of your STERWINS Trimmer lacks power, it may be because the carbon brushes are about to be consumed, consider changing the carbon brushes, spring and support. Also, the carbon brushes spring might not be strong enough.

STERWINS 25EGT1-300.1 Specifications

General

Brand	STERWINS
Model	25EGT1-300.1
Category	Trimmer
Language	English

Summary

Introduction

Keep Manual for Reference

Emphasizes reading and keeping the manual for future reference, crucial for safe operation.

Safety Instructions

Intended Use of Product

Details the product's intended outdoor use, dry conditions, and restrictions.

General Safety Warnings

Provides essential safety advice, like avoiding operation near hazards and not forcing the product.

Symbols on the Product

Explains various safety and compliance symbols found on the product itself.

Symbols in this Manual

Explains the meaning of symbols used within the instruction manual for warnings and notes.

Work Area Safety

Covers safety precautions related to the work environment, including cleanliness and avoiding explosive atmospheres.

Electrical Safety

Highlights electrical hazards, particularly electromagnetic fields and water exposure.

Personal Safety

Focuses on operator's personal safety, including alertness, physical condition, and avoiding distractions.

Personal Safety (Continued)

Continues personal safety advice covering safety equipment, avoiding untimely start-up, and proper attire.

Power Tool Use and Care

Guides on safe operation, maintenance checks, and handling the tool correctly.

Electric Grass Trimmer Safety Warnings

Specific safety warnings for the grass trimmer, including aiming, handling, and guards.

Recommendations

Provides key recommendations for safe electrical connection and operation in adverse weather.

Service

Instructions on professional servicing and replacement parts to maintain safety.

Residual Risks

Discusses potential hazards even when following instructions, like thrown pieces, noise, and vibrations.

Technical Data

Assembly

Assembly Warning

Crucial warning about ensuring the product is fully assembled and undamaged before operation.

Unboxing

Installation

Adjusting Auxiliary Handle

Details how to adjust the auxiliary handle's height for optimal use.

Attaching the Guard

Instructions for securely fitting the protective guard to the power head.

Connecting to Mains

Steps for connecting the power line to the tool and the mains supply.

First Use

Guidance for the initial operation, emphasizing safety and focus.

Operation Safety Warnings

Trimming Tips

Advice on how to effectively trim grass, including posture, angle, and line feeding.

Auto-feeding

Explains the automatic line feeding mechanism and how to use it efficiently.

After Use

Transportation

Wintering

Storage

Maintenance

Cleaning the Product

Steps for cleaning the trimmer, emphasizing safety and avoiding harsh cleaning agents.

Servicing

Details on regular servicing checks for spool line, spool protection, and power cable.

Exploded View

Troubleshooting

Troubleshooting (Continued)

Continues troubleshooting for issues like no engine start, abnormal vibration, noise, and lack of power.

Warranty

Related product manuals

STERWINS 25 EGT1-300.1

31 pages

STERWINS 1200 BC-2

292 pages

STERWINS 20 VGT2-28.1

309 pages

STERWINS 20 VHT2-50.1

267 pages

STERWINS PBC1-26L-AB.2

STERWINS 43PBC1-40BH.1

65 pages

STERWINS 52PBC1-43BH.1