STERWINS 25EGT1-300.1 - Unboxing; Installation

30
FR
EN
4.1 UNBOXING
8
7
11
9
1
2
3
4
5
6
10
1. Lock-out button
2. Switch trigger
3. Power cord with plug
4. Knob component
5. Auxiliary handle
6. Attachment shaft
7. Power head
8. Guard
9. String head
10. Flower guard
11. Push button
• Wear gloves when unboxing.
• Do not use cutter, knife, saw or any other similar tool for unboxing.
• Carry the tool only by the handle.
• Risk of re in case of dry vegetation in the neighborhood.
• The engine shall always be OFF when the machine is left on the ground.
• Keep the box for further reuse (transport and storage).
• Keep instruction manual in a dry area for further consultation.
4.2 INSTALLATION
Assemble the shaft: illustration
2.1
Join the three shafts and install the screw by screw driver. Tighten the screw securely.