To Next Page

To Previous Page

is loose tting or that has hanging cords or ties.

·Thoroughly inspect the area where the machine is to be used

and remove all objects which can be thrown by the machine.

·Before using, always visually inspect to see that the cutting

means, blade nut and the blade assembly are not worn or

damaged. Replace worn or damaged components in sets to

preserve balance. Replace damaged or unreadable labels.

·Before use check the supply and extension cord for signs of

damage or aging. If the cord becomes damaged during use,

disconnect the cord from the supply immediately. DO NOT

TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY .Do not

use the machine if the cord is damaged or worn.

·Operate the machine only in daylight or in good articial light.

·Avoid operating the machine in wet grass.

·Always be sure of your footing on slopes.

·Walk, never run.

·Mow across the face of slopes, never up and down.

·Exercise extreme caution when changing direction on slopes.

·Do not mow excessively steep slopes.

·Use extreme caution when reversing or pulling the machine

towards you.

·Stop the blade(s) if the machine has to be tilted for

transportation when crossing surfaces other than grass, and

when transporting the machine to and from the area to be

used.

·Never operate the machine with defective guards or shields,

or without safety devices, for example deectors and/or grass

collector, in place.

·Switch on the motor carefully according to instructions and

with feet well away from the blade(s).

SAFETY INSTRUCTIONS

229

STERWINS ELM2-40P-3W.4 User Manual

Questions and Answers: