2. SAFETY INSTRUCTIONS
Advice
-Do not overreach. Keep the balance at all times, to always be sure of the
footing on slopes.
Walk, never run.
-Do not connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply for the reason that damaged
cords can lead to contact with live parts.
-Keep extension cords away from moving hazardous parts to avoid
damages to the cords which can lead to contact with live parts.
low temperatures.
ADDITIONAL SAFETY INSTRUCTIONS FOR ELECTRIC SHREDDER
Do not use appliance for a use other than the intended use.
Maintain labels and nameplates on the appliance. These carry important
safety information. If unreadable or missing, contact the point of
purchase for a replacement.
The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be
supplied by the operator.
Before starting, ensure that the feed inlet is empty.
Always wear ear and eye protection and wear gloves during operation.
Longer material standing out from the shredder could lash out when
being pulled in by the blades. Keep a safe distance.
Ensure the ventilation slots are not covered.
Always wear substantial footwear and long trousers while operating the
machine.
191
EN
To Next Page
Loading...
