To Next PageTo Next PageWhat to do if my STERWINS ESH1-40.3 does not start?
If your STERWINS Paper Shredder doesn't start, first ensure it's properly connected to a power supply. If it is, allow the product to cool down, then press the “ON” button. Also, make sure the guard is correctly fixed. If the issue persists, it is advisable to have it checked by a specialist electrician.
Why is my STERWINS ESH1-40.3 Paper Shredder making excessive noise?
Excessive vibration or noise in your STERWINS Paper Shredder can be due to several reasons. It might be caused by a damaged blade, in which case you should have the blade replaced by a certified agent. Alternatively, the blade could be blocked; try removing the blockage. Also, check if any bolts/knobs are loose and tighten them.
How to fix STERWINS ESH1-40.3 Paper Shredder that is not cutting cleanly?
If the shredding material is not cut cleanly by your STERWINS Paper Shredder, the counter blade may not be properly adjusted. Try adjusting the counter blade to resolve this issue.
General| Brand | STERWINS |
|---|---|
| Model | ESH1-40.3 |
| Category | Paper Shredder |
| Language | English |
Steps and guidance for learning to use the machine safely before operation.
Guidelines for safe machine usage during operation.
Procedures for upkeep and storing the shredder.
Guidance on professional repair and parts replacement.
Methods to minimize exposure to vibration and noise.
Actions for emergencies and awareness of residual dangers.
Specific safety advice and practical tips for operation.
