STERWINS ETHT2-50.3 - Page 216

2. SAFETY INSTRUCTIONS
be caught in moving parts. Use of sturdy gloves, non-skid footwear and
safety glasses is recommended.
6. If the cutting mechanism strikes any foreign object or the hedge
trimmer starts making any unusual noise or vibration, shut o the power
source and allow the hedge trimmer to stop. Disconnect the supply cord
from main and take the following steps:
--inspect for damage;
--check for, and tighten, any loose parts;
--have any damaged parts replaced or repaired with parts having
equivalent specications
Operation
1. This product shall not be used for any other purpose as described
within these instructions. Follow all given instructions closely.
2. Stop the product and disconnect the supply cord from the power
supply before
•cleaningorwhenclearingablockage,
•checking,carryingoutmaintenanceorworkingontheproduct,
•adjustingtheworkingpositionofthecuttingdevice,
•leavingtheproductunattended.
3. Ensure that the product is correctly located in a designated working
position before starting the product. Do not use this product on steps
or a ladder.
4. While operating the product, always ensure that the operating position
is safe and secure.
5. Do not operate the product with a damaged or excessively worn
cutting device.
6. Always ensure that all handles and guards are tted when using the
product. Never attempt to use an incomplete product or one tted
with an unauthorized modication.
216
EN