8.EXPLODED VIEW WITH PARTS LIST
Part no. Description Part no. Description
1 Cable 32 Button
2 Cable sleeve 33 Motor bracket
3 Soft grip 33.1 Screw
4 Connector 33.2 Carbon brush support
5 Switch 33.3 Carbon brush casing
6 Cable clamp 33.4 Bush
7 Reset spring 33.5 Carbon brush
8 Self-locking button 33.6 Stator
9 Left handle 33.7 Wind deector
10 Shock pad 33.8 Bearing
11 Belt-ring assay' 33.9 Rotor
11.1 Screw 33.10 End of teeth base
11.2 Belt-ring 33.11 Screw
11.3 Hexagon nut 33.12 Aluminum frame
11.4 Belt 33.13 Oil bearing
12 Spring line 33.14 Screw
13 Tube sleeve 33.15 Gear bae
14 Telescopic rod components 33.16 Screw
14.1 Telescopic rod components 33.17 Gasket
14.2 Ring 33.18 The connecting line assay'
14.3 Connecting bracket 33.19 inductance
14.4 The positioning pin 33.20 inductance
14.5 Lock nut 34 Cylindrical pin
14.6 Cylindrical pin 35 Guide bar sleeve
14.7 Adjustment button 36 Gear assay'
14.8 Bolt 36.1 Output shaft
15 Capacitance 36.2 Big gear
16 Coil 36.3 Wobbler
17 Screw 36.4 Blade assay'
18 Screw 36.5 Plate
19 Right handle 36.6 Plate
20 Switch spring 36.7 Axis with circlips
21 Switch button 36.8 Pin
22 capacitance 37 Bearings xed block
23 Spring line 38 Bearing
24 The big tube connector assay’ 39 Right housing
25 Right auxiliary handle 40 Spring
26 Self-locking nut 41 Yellow wax tubes
27 Button 42 Heat shrinkable tube
28 Left auxiliary handle 43 Female terminal
29 Gasket
30 Screw
31 Left housing
229
EN
To Next Page
Loading...
