117
4.6 AFTER USE
Switch the product o. Check, clean and store the product as described below.
5. TRANSPORTATION
Transporting the machine may require that you meet certain requirements specic to your country.
Please make sure you comply with them by contacting the authorities of your country. Always switch
the product o. Ensure temperature during transportation is never beyond the range indicated in
storage section. Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles. Secure the product to prevent it from slipping or falling over.
6. WINTERING & STORAGE
Store the machine : Illustration
6.1
Only store the machine in a clean, dry, ventilated place with a temperature range of 4°C to 24°C. Cover it
in order to provide added protection. We recommend using the original package for storage or covering
the product with a suitable cloth or enclosure to protect it against dust.
Never coil the hose. If the hose is tangled or twisted, uncoil it using hot water and then return it to its
original shape. The pool coverage rate will be reduced if the hose is twisted or tangled. Store the disc and
place it on a at surface to prevent it from deforming.
WARNING ! To avoid damaging the hose, never leave it in
direct sunlight; leave it in water or under a temperate
shelter.
7. MAINTENANCE
WARNING ! Always make sure to disconnect the robot cleaner
from the suction nozzles of the pool or skimmer before
cleaning or purging the pool lter.
To Next Page
Loading...