118
Cleaning the product: Illustration
5.1
Clean the skimmer and pump baskets. After cleaning, let the ltering system run without the cleaning
robot for at least ve minutes before reconnecting the cleaning robot.
WARNING ! To avoid danger of injury, turn o the cleaner
suction pump before performing this step
Checking the diaphragm: Illustration
5.1
to
5.9
If the robot stops, stop the suction pump and remove the cleaner from the pool. Check that the
diaphragm is not blocked. Check that the diaphragm is not damaged (torn) and that its state of wear is
not too advanced if this is the case, clean or replace it.
To Next Page
Loading...