40
TROUBLESHOOTING GUIDE
Case 1. Do not start on
Case 2. Not enough power/ Poor accelerator/ Unequal idle speed
Case 3. Does not lubricate
If it seems that the chainsaw needs an additional maintenance, please take it to the nearest
Garland service.
Check that the fuel is not in a bad
state.
Replace it with a suitable fuel.
Check that the fuel does not leak
from the exhaust
Remove and dry the spark plug.
Check that there is spark in the
plug.
Replace it with a new plug.
Check that the fuel is not in a bad
state.
Replace it with a suitable fuel.
Check that the air´s filter and the
fuel´s filter are not dirty.
Clean them.
Possibly the carburettor is not been
fitted properly.
Take it to the technical service so
they can fit the needles of the
carburettor
Check that the lubrications orifices
are clean
Clean them.
To Next Page
Loading...
