36
EN
of moving parts, breakage of
parts and any other condition
that may affect the power
tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed. Use of the power tool
for operations dierent from those
intended could result in a hazardous
situation.
Service
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
If the replacement of the supply cord
is necessary, this has to be done by
the manufacturer or his agent in order
to avoid a safety hazard. If the carbon
brushes need to be replaced, have
this done by a qualied repair person
(always replace the two brushes at
the same time).
Electrically powered grass
trimmer safety warnings
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENC
Training
a) Read the instructions carefully.
Be familiar with the controls and
the correct use of the machine.
Please use the machine properly;
any unintended use may cause a
danger to people.
b) Never allow children, persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge or
people unfamiliar with these
instructions to use the machine.
Local regulations can restrict the
age of the operator.
c) Keep in mind that the operator or
user is responsible for accidents or
hazards occurring to other people
or their property.
d) Note: National regulation can
restrict the use of the machine.
e) Keep others including children,
animals and bystanders, outside
the 15 meter hazard zone. Stop the
machine immediately if you are
SAFETY INSTRUCTIONS
To Next Page
Loading...
