STERWINS YT5309-04 - Technical Specifications; Product Specifications

EN
38
The sound intensity level for the operator may exceed 85dB(A) and protection measures are necessary.
The declared vibration total value has been measured in accordance with a standard test method and may
be used for comparing one tool with another. The declared vibration total value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the tool can dier from the declared value
depending on the ways in which the tool is used. Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched o and when it is running idle in addition to the
trigger time). Depending on the actual use of the product the vibration values can dier from the declared
total! Adopt proper measures to protect yourself against vibration exposures! Take the whole work process
including times the product is running under no load or switched o into consideration! Proper measures
include among others regular maintenance and care of the product and application tools, keeping hands
warm, periodical breaks and proper planning of work processes!
Model YT5309-04
Rated voltage 220-240V~50Hz
Rated input power 450W
Rated no-load speed 3800/min
Cutting length 420mm
Sound pressure level L
pA
90 dB (A);
Uncertainty K
pA
3.0 dB (A)
Measured sound power level L
wA
101.1 dB (A)
Uncertainty K
wA
: 3 dB (A)
Guaranteed sound power level L
wA
103 dB (A)
Vibration value of handle:
ah (rear handle)= 2,36 m/s²
ah (front handle)= 2,75 m/s²
K = 1,5 m/s²
TECHNICAL SPECIFICATIONS