12 13
Introducción
El Alcance Control SX2 fue desarrollado para comandar equipos de audio
y video automotriz o residencial a larga distancia con capacidad para hasta
16 funciones.
Debido a su tecnología de radio frecuencia (RF) es posible controlar su
equipo en hasta 500m de distancia en área abierta (visada)
Su transmisión se realiza en FSK reduciendo las interferencias externas,
su código está cifrado y con tecnología de código rodante que impide su
clonación.
Descripción General
LED Indicador
Power
Avanzar ()
Retroceder ()
Sube ()
Baja ()
Volumen (+)
Volumen (-)
Play/Pause
2nd (Habilita
Segunda Función)
Manija para Collar
Acabamiento Protector
Collar
2
1
3
4
5
6
7
8
9
10
11
12
13
2
3
4
5
6
7
8
9
10
11
12
13
1
Diagnos cs
In this case the central stops responding to commands from the control TX2
and your Led indicator (16) ashes con nuously. Remake the ming control
with the central to restore opera on.
• Invalid transmission default:
During the learn mode some informa on may be recorded wrong due to
interference from ambient light, in this case the central will not transmit
the command to the device related to that key and keep the LED indicator
(16) on for 2 seconds. To solve this situa on redo the programming of your
control in the “Learn " mode for the keys with problem.
• The Alcance Control SX2 does not control my equipment:
Although the Alcance Control has a “Learn" func on to nd equipment
not previously registered in the memory , there may be original brands and
models of controls that will not be recognized.
Technical Speci ca ons
Power:
Central: 5 ~ 16V dc
Control: Ba ery CR2032 - 3,0V
Max. Consump on:
Central: 35mA
Control: 10mA
Max. Range in Open Area: 500m
Central Freq. of Transmission: 433,92 MHZ
Max. Transmit Power: 10mW
Dimensions:
Central: 57,5 x 33 x 12 mm
Control: 82,7 x 42 x 15,7 mm
Weight:
Central: 46 g
Control: 37 g
Modula on: FSK
To Previous Page
Loading...
