Stevens AeroModel FreDe 2X User Manual

FREDe 2X
A toonscale
tm
giant by Stevens AeroModel
Wing Span: 55 inches | Wing Area: 1050 square inches | Average Flying Weight: 72 ounces
Build Instructions - Version 1.24 (revised 3.02.2015)
Build Instructions
FREDe 2x (1100) - Build Instructions © 2010 Stevens AeroModel, all rights reserved.! Page 1

Stevens AeroModel FreDe 2X Specifications

General

Power System	Electric
Skill Level	Intermediate
Model	FreDe 2X
Recommended Motor	Brushless outrunner
Recommended Battery	2-cell LiPo
Recommended Propeller	6x
Construction Material	Balsa

Summary

Laser Cut Parts Inventory

General Assembly Instructions

Pre-sanding Wood Sheets

Instructions for lightly sanding all wood sheets before removing parts.

Bonding Assembly Techniques

Advice on dry-fitting parts before gluing and using medium CA glue.

Handling Tight-Fitting Parts

Wing Construction

Fuselage Construction

Tail Feather Assembly

Horizontal Stabilizer and Elevator

Vertical Stabilizer and Rudder

Strut Assembly

Final Assembly Part 1

Tail Feathers Installation

Tail Wheel Assembly

Control Installation

Strut Finishing

Wing Pin Assembly

Motor Installation

Pilot and Cockpit Finishing

Flight Control Setup and Balance

Pre Flight to First Flight

Pre-Flight Advice and Tips