S - 34 | English
Checking the Motor Number/Motor Type Identification
To check whether the built-in motor complies with the correct model, the motor
number/motor type identification on the motor can be compared to the number on
the anti-manipulation plate. Follow the steps below to do the check:
1. Remove the left crank of your speed pedelec by using an 8 mm Allen key and a
crank extractor.
2. Undo the three marked bolts of the motor cover by using a Torx T20.
3. Remove the motor cover. The number marked on the photo is the motor number.
4. Re-mount the motor cover by using the three Torx bolts at a torque value of 1 Nm.
5. Tighten the crank at a torque value of 45-50 Nm.
STEVENS Vertriebs GmbH • Asbrookdamm 35 • D-22115 Hamburg
Bike Card
Model/Size: .............................................................. / .............................................................
Frame no.: ..............................................................................................................................
Suspension fork/Rear shock:
Manufacturer: .............................................................../ .............................................................
Model: .............................................................../ .............................................................
Serial no.: .............................................................../ .............................................................
Rechargeable battery:
Model: ..............................................................................................................................
Key number: ..............................................................................................................................
Voltage (Volt): ..............................................................................................................................
Ampere-hour (AH): ..............................................................................................................................
Capacity (watt hours): ..............................................................................................................................
Intended Use
Use according to £ Category 1 E £ Category 4 E £ Category 5 E £ Category 6 E
Permitted overall load of the STEVENS pedelec: ................. kg (lbs)
Permitted load of pannier rack: 25 kg (55.1 lbs)
Trailer permitted
£ yes £ no
If yes – permitted trailer load: ................... kg (lbs)
Child seat permitted
£ yes £ no
Wheel / Tyre size: ................................................................
Colour: ................................................................
Extras: ................................................................
Brake levers Right lever Left lever
Brake lever assignment: Front wheel brake £ Front wheel brake £
Rear wheel brake £ Rear wheel brake £
Hint to the STEVENS dealer: Copy this bike card and keep one copy in your customer file. Send anoth-
er copy to Stevens Vertriebs GmbH directly after the sale of the STEVENS pedelec.
Stamp and signature of the STEVENS dealer
© The reproduction or reprint is not permitted
Danger:
Read at least chapters “Before Your First Ride” and
“Before Every Ride” in your comprehensive STEVENS
user manual on the enclosed CD-ROM.
Note:
Register your STEVENS bike on www.stevensbikes.de.
You will be informed about technical upgrades, if
necessary.